The Guide to Replace Chevy Cruze Windshield Wipers
Today We’re going to replace the winch wipers on my Chevy Cruze, it’s relatively easy straight forward process.
First, we will remove this clip by just pulling upwards and by pulling up the arm on the windshield wiper. Pull it up, move the winch wiper towards the driver’s side, roll a car and then bring it vertically. that’s going to release it from the j-hook and then we’ll pull up and out, do that same process on the passenger side.
Now with that a new winch wiper on the passenger side this plastic clip on top is what we need to remove.
By removing that we’re just going to pull up on it, take that plastic hook and we will slide it onto the arm of the vehicle. And then we’re going to take the wiper and insert it into the j-hook of the windshield wiper arm. Sliding it towards the passenger side of the vehicle. We’ll take that plastic clip and push it down back on top of the windshield wiper. That passenger side is complete kind just making sure that a clip is secure to securely fasten there.
On the driver’s side, same deal takes that plastic clip off that wiper slide it onto the arm, take that wiper slide the j-hook of the arm on to the wiper. Sliding it towards the passenger side of the vehicle, take that clip to slide it down onto the actual wiper.
Now let’s go ahead and give these a test and see if we can clean that little spot off my windshield and make sure they perform the way we expect.
Leave a Reply