How to Replace Chevy Cruze Interior Lights to LEDs
Today I’m going to show you how to replace your factory map and dome lights to a new bright white LED. Instead of these stock yellow factory bulbs, the only tools you’re going to need is a pry tool thing. I’m personally going to use some needle nose pliers and a hold microfiber towel to help pull out the ball because it’s going to be hot. So if you kind of wrap it in this, it’s going to kind of help it to protect it from like shattering just don’t squeeze too hard. Let’s get to it.
What you’re going to want to do first is take your pry tool and also turn off the lights because they’re going to be hot. Go to the front of the lens and then just pull it down, now I’m going to do is to take my needle noses and a microfiber towel take out these factory bulbs. Take your new LED bulbs, put the new lights in, then what I always like to test to make sure they work before I put on the lens. Because if one doesn’t work and i have the lens on I’m going to take it back off and do it again. It’s really bright outside so there’s no but it’s very white just put this cover back on, there you go that’s it, let’s move on to the back.
Now that we’re at the back, let’s go ahead and start this install. You will see the light and turn it off, it’s basically like the front, just a little bit different to take your pry tool go to the front of the light. Pull it down as you see the whole piece actually came off if you go to the front or the back of it, there are two little points back. It’s really easy pry it off real quick with your finger.
And then just like the front, you just put pull it towards and the old one comes off or that the lens comes off. You get your microfiber towel on your needle noses just because that ball may still be hot pull the bulb out.
Take your new LED bulb, put it right back in its place. Let’s go ahead and try this out. It’s working put the lens back on just like uninstall which is backwards. It’s all on push it in and there we go that’s how you install the LEDs on your chevy cruze.